L03 pressure sensor for food industry machinery and equipment

Sensor-Technik UK is introducing the STW L03 pressure transducer. With its flush stainless steel diaphragm and compact construction, the L03 is designed with the food and beverage industry in mind. Mounted into a system via the weld-flange SF01, the L03 provides a safe, clean and reliable interface between monitoring and control systems, for applications such as level measurement.

Cooling systems for the food and pharmaceuticals industries

Cooling systems for industrial cabinets in corrosive and harsh production environments, such as the food, drinks and pharmaceuticals industries, must meet particularly strict requirements. For these industries Pentair now offers the new Hoffman WCHE series of air/water heat exchangers; these filterless cooling systems are completely closed to the outside environment, so neither dust nor water can enter, and do not pollute the surroundings with waste heat from the cabinet.

Ultrasonic sensors UA30CAD60 from Carlo Gavazzi Automation

Carlo Gavazzi Automation is launching its new Ultrasonic sensors range UA30CAD60. The improved sensing distance and a simple "˜teach' procedure promise to make these sensors much more competitive in the Industrial Market. Available in M30 housing with a front diameter of 30mm, in cable or M12 4-pin connector versions, the new UA30CAD60 series complements the company's range of Ultrasonic reflective sensors, offering sensing distances of up to 6.000mm.

Counter Module adds flexible counting capability to CPX systems

Festo is introducing an addition to its CPX Modular Automation Platform, the CPX-2ZE2DA-PI Counter Module. System builders can now incorporate counting capability simply by plugging a CPX Counter Module directly into their CPX system; this eliminates the need for an external counter and the associated costs it would present in terms of hardware and software integration effort, space requirement, cabling and installation time.

3M extends Cubitron II range for steel application

3M is extending its Cubitron II Range of abrasives due to the continuing success of the innovative technology behind the products. The new Cubitron II Cut and Grind Wheels by 3M offer particular benefits for the following processes: cutting; notching; gouging; fillet weld removal and bevelling of both mild and stainless steel. Tests have also proved that not only does the range offer an extended service life against its competitors, but also performs significantly faster too. These capabilities are made possible by the use of precision shaped grain technology, first introduced in the Cubitron II Range of Abrasive Belts and Discs from 3M.

New software for easier implementation of vision-guided robotics

Matrox Imaging is announcing new communication software that enables vision systems running Matrox Imaging software to interface directly over an Ethernet link with robot controllers from vendors including ABB and FANUC. The socket-based communication protocol was developed by Centre de Robotique et de Vision Industrielles (CRVI), an experienced Quebec technology transfer centre specialised in industrial robotics and vision applications.

Cryogenic desserts

From student project to Oscar winning sorbet, with the help of Maxon's DC brushless motor, gearhead and motor controller.

Reduce cabling with distributed servo drives from Inmoco

Reduced cabling requirements, smaller control cabinets, greater design freedom, lower machine complexity and higher OEE (overall equipment effectiveness) are all described as benefits of adopting Kollmorgen AKD-N distributed servo drives from Inmoco. Depending on the application, cable reductions of over 80 per cent can be achieved.

Reduce cabling by up to 80% with distributed servo drives

Reduced cabling requirements, smaller control cabinets, greater design freedom, lower machine complexity and higher OEE (overall equipment effectiveness) are all benefits of adopting Kollmorgen AKD-N distributed servo drives from INMOCO. Depending on the application, cable reductions of over 80% can be achieved.

Norgren introduces safer option for inflatable hose filling

Norgren is launching a new control unit that offers a safer and faster option for inflatable hose filling in bulk materials handling operations. Designed to deliver Engineering Advantage for the food and beverage sector, the control unit also has scope for use in other industries.